How to Enable WiFi on a Poly VVX Phone



If your Poly VVX desk phone has WiFi capability (check back or side of phone for a USB port), you can then plug in your USB dongle into that port and also plug in a Poly power adapter (since the phone is working off of WiFi, no ethernet cord is needed).   


Once the phone boots up, do the following:

  1. Home >
  2. Settings >
  3. Basic >
  4. Wifi.  
  5. If WiFi is set to ON, you can enter in the wireless credentials for your location and then hit connect.
  6. If Wifi is not set to ON, move the setting to ON and then allow the phone to reboot.  Once it reboots, follow steps 1-5 above.
Was this article helpful?
0 out of 0 found this helpful
Have more questions? Submit a request
Powered by Zendesk